Where Can I Find a Used Engine at a Reasonable Price?

"Reasonable" is doing a lot of work in that question, and it is worth unpacking before you start shopping. A reasonable price for a used engine is not the lowest number you can find. It is the lowest number you can find from a source that will still be answering the phone if the engine turns out to be wrong — and that has more to do with where you buy than with how hard you haggle.

This page answers the question honestly, including the places to look that are not us.

Where do used engines actually come from?

Almost every used engine in the United States starts in the same place: a vehicle that was written off and sent to a salvage yard. The yard pulls the engine, tests it to whatever standard that yard keeps, tags it and lists it. From there it either sells directly to a walk-in customer, or it sells through the trade — to sellers who consolidate stock from many yards, handle the fitment matching and arrange freight.

So when you compare prices across different websites, you are often looking at the same physical engines at different points in that chain. The price differences are mostly paying for different amounts of work, risk and recourse — not for different metal.

What are the five places to look, and what is each one good at?

1. A local salvage yard

Cheapest, most effort. If there is a yard near you with your vehicle on the lot, this is the lowest price you will find — you are buying at the start of the chain with no freight. The trade-offs are real: you need to know exactly which engine variant you need, the warranty is usually short or nothing, and if the engine is wrong you are driving back with it in the bed of a truck.

Best for: people who know the car well, live near a big yard, and can collect.

2. car-part.com

The trade's own search engine. It searches the live inventory of thousands of salvage yards at once and shows you what each one has and what they want for it. It is the single best way to find out whether your engine even exists in the market right now.

What it does not do is any of the work after that. You are contacting individual yards, confirming fitment yourself, arranging freight yourself, and holding a separate relationship with each yard. Warranty terms vary yard by yard. For a common engine that you can identify with confidence, it is excellent. For an engine with variants — and most engines have variants — it puts the fitment risk entirely on you.

3. eBay Motors

Wide selection, mixed accountability. You will find yards, rebuilders and individual sellers all on the same page, with buyer protection sitting over the top. Prices run from genuinely good to optimistic. Read what the listing actually promises: "tested" means very different things to different sellers, and shipping on an engine is rarely included in the headline price.

4. A used-parts seller (this is what we are)

More expensive than a yard, less work and more recourse. A seller consolidates stock across many yards, matches the engine to your VIN, stands behind the fitment, carries the warranty centrally and arranges freight. You pay for that layer.

The honest case for it is not that the metal is better. It is that one organisation is accountable for the engine being right, and that matters most on vehicles where several different engines wear the same badge. The honest case against it is that if you know exactly what you need and can collect locally, you are paying for work you could do yourself.

5. A rebuilder or remanufacturer

Most expensive, longest warranty. A remanufactured engine has been stripped, machined and reassembled to a specification with new wear parts. It typically costs roughly double a comparable used unit and carries a far longer warranty. If you intend to keep the vehicle for many years, the maths can favour it. If the car is worth $4,000, it usually does not.

There is also the dealership, which will normally quote a new or factory-reman engine. That is the highest-price route by a wide margin and is rarely the answer to "reasonable".

So what actually counts as a reasonable price?

Here is the useful part. These are measured medians across our own live listings — not estimates, and not a price list we would like to be true:

Engine Entry price Typical Units measured
Up to 2.0L four-cylinder $1,180 $2,000 3,877
2.1L to 2.5L four-cylinder $1,180 $1,870 2,899
2.6L to 3.5L V6 $1,280 $2,070 3,330
3.6L to 5.0L V6 and V8 $1,280 $1,970 3,600
Over 5.0L V8 $1,290 $2,850 2,748
Diesel $2,200 $3,830 849

The entry price is the higher-mileage option in each class. The typical column is the median. If a quote you have been given sits well below the entry price for its class, that is worth a question rather than a celebration — see the red flags below.

Note the row that surprises people: the 3.6L–5.0L band is cheaper on average than the 2.6L–3.5L band. Supply sets used-part prices more than displacement does. America scrapped enormous numbers of full-size trucks and SUVs, so 5.3L and 4.6L V8s are abundant and cheap. A scarcer mid-size V6 can cost more than a big V8. If your engine is common, you are in luck regardless of its size.

Our full pricing breakdown goes further into what moves the number, and how used compares with rebuilt and remanufactured.

Why am I being quoted two very different prices for the same engine?

Usually because they are not the same engine, even though your car wears one badge.

A real example from our own listings: a 2007–08 BMW X5 3.0L comes in at around $1,868 or around $5,100 depending on whether the car has Adaptive Drive active suspension. Same year, same model, same displacement. A buyer who takes the cheaper quote without checking has not found a bargain — they have found a different part.

This happens more than most people expect. A BMW 530i has worn three engines, two of them both described as 3.0L — one a V8 and one an inline six. A Mercedes listing marked S-Class may be an SL roadster. A 2006 BMW 325i convertible takes a 2.5L while the sedan of the same year takes a 3.0L.

Before you compare two prices, make sure you are comparing two of the same thing. We have written this up in detail for the two makes where it causes the most trouble: why the BMW badge number is not the engine and reading the Mercedes Type number instead of the badge.

When is a cheap engine a bad deal?

Not every low price is a trap, but these are the patterns worth slowing down for:

  • No mileage stated. Mileage is the single biggest price driver on a used engine. A seller who will not state it either does not know or would rather you did not.
  • "Tested" with no description of the test. Ask what was actually done — a compression check, a run on a stand, or simply that it turned over.
  • Freight not mentioned. An engine ships on a pallet and freight is not trivial. A price that looks $400 better can end up level.
  • No warranty, or a warranty with no written terms. Ask for the terms in writing before paying, whoever you buy from.
  • The seller does not ask for your VIN. This is the clearest signal of all. Anyone selling you an engine without establishing which variant your car takes is not managing the risk — they are passing it to you.

How do I find a reasonable price for my engine?

Three steps, in order:

  1. Identify the engine properly, not just the car. Year, make, model, engine size, and whether the car is two- or four-wheel drive. On many vehicles the VIN is what settles it, and the character that encodes the engine is not in the same position on every make — eighth on most American vehicles, fourth on a Nissan or Infiniti, fifth on a Toyota, sixth on a Honda.
  2. Find out whether it is a common engine or a scarce one. This sets your expectations more than anything else. A quick look at how many are listed anywhere tells you whether you are in a buyer's market.
  3. Compare like for like, with freight and warranty terms included in every number you are comparing.

Our used engines by model index lists every model we cover on its own page, with the variants for that model set out and live stock counts. If your model is there, the variant question is already answered for you.

Frequently asked questions

Where is the cheapest place to buy a used engine?

A local salvage yard, if one near you has your vehicle. You buy at the start of the supply chain with no freight cost. The trade-off is that you must identify the correct engine variant yourself, warranty cover is usually minimal, and you have to collect it.

Is it cheaper to buy a used engine online or locally?

Locally, on the sticker price. Online sellers add a layer of cost for fitment matching, central warranty and freight. Whether that layer is worth paying for depends on how confident you are about which engine variant your vehicle takes, and on how much recourse you want if it turns out to be wrong.

What is a reasonable price for a used engine?

Measured across our own live listings, four-cylinder engines typically run around $1,870–$2,000, V6 and V8 engines around $1,970–$2,070, large V8s around $2,850 and diesels around $3,830, with entry prices from roughly $1,180 for petrol engines and $2,200 for diesels. Mileage, scarcity and the specific variant move the figure within those ranges.

Why is a V8 sometimes cheaper than a V6?

Because supply sets used-part prices more than engine size does. Large numbers of full-size trucks and SUVs are scrapped every year, so their V8s are abundant. Some mid-size V6 applications are comparatively scarce, and scarcity costs more than displacement.

How much does it cost to ship a used engine?

An engine ships crated on a pallet by freight, and it is a meaningful cost that is often quoted separately. Always ask whether a price includes delivery before comparing it with another. We ship free anywhere in the lower 48, so the quoted price is the price.

Should I buy a used engine or a rebuilt one?

A remanufactured engine typically costs roughly double a comparable used unit and carries a far longer warranty. If you plan to keep the vehicle for many more years, that can be the better value. If the vehicle's own value is close to the cost of the remanufactured engine, a tested used unit usually makes more sense.

What should I have ready before asking for a quote?

The full 17-character VIN is the single most useful thing, because it encodes the engine. Failing that: year, make, model, engine size, two- or four-wheel drive, and whether the vehicle is an automatic or a manual. On some vehicles the build date from the driver's door jamb matters too, because the engine changed partway through the model year.

What we list, and what we do not

We list used engines and transmissions pulled from salvage vehicles, tested before listing, shipped crated on a pallet with a written warranty, and shipped free anywhere in the lower 48. We are not a remanufacturer and we do not pretend a used engine is a new one.

If you want to check what exists for your vehicle, start at used engines by model or used transmissions by model. If your model is not listed there, send us the VIN and we will tell you what we have — including when the answer is nothing.

Back to blog