Chrysler Sebring Used Engines

Used Chrysler Sebring engines from 2002 to 2010. Read the first section before anything else: for part of this period Chrysler sold two mechanically unrelated cars under the same name, and that catches more people out than every other detail on this page combined. Every engine is listed as tested and ready to install, ships with a written warranty, and ships free anywhere in the lower 48.

The Sebring Coupe is a different car

Through 2005 there were three Sebring body styles — sedan, convertible and coupe — and the coupe shares almost nothing with the other two. The sedan and convertible are Chrysler's own platform. The coupe was built on a Mitsubishi platform with Mitsubishi engines.

  • Coupe 2.4, VIN G — and it divides again by automatic or manual
  • Coupe 3.0 V6, VIN H — likewise automatic or manual

No sedan or convertible engine will fit a coupe, and no coupe engine will fit a sedan or convertible. If your car is a two-door Sebring from 2001 to 2005, you need the coupe listings. Our listings abbreviate the body as Sdn, Conv and Cpe, and some spell it out in full.

2002 to 2006: the sedan and convertible engines

  • 2.4 four-cylinder, VIN X, engine ID EDZ — the non-PZEV version
  • 2.4 four-cylinder, VIN J, engine ID ED2 — the PZEV version, on 2004 and 2005. A PZEV car needs the PZEV engine.
  • 2.7 V6, VIN R
  • 2.7 V6, VIN T — flex fuel
  • 2.7 V6, VIN U — flex fuel

The 2.7 appears under three different VIN characters, two of them flex fuel. Displacement alone identifies nothing here.

2004: count the tone ring windows

This is the detail that decides a 2004 2.7, and it is not visible without looking at the flywheel:

  • 13 tone ring windows — the current-generation setup
  • 32 tone ring windows — the next-generation setup

The two use different engine management, so the engine control module has to match. Some 2004 listings also specify with or without a leak detection pump port, and whether the EGR sits on the right-hand head.

Be aware that not every one of our 2004 listings states the tone ring count. Where it is stated, match it. Where it is not, do not assume — send us the VIN and we will confirm which version the engine is before it ships. We would rather answer that question than send you an engine your ECM cannot run.

The EGR valve split

Across 2002, 2005 and again from 2008 to 2010, listings divide on whether the engine is the version with or without an EGR valve. Check your own engine before choosing — this is a straightforward visual check under the bonnet.

2007 to 2010: the later sedan and convertible

The redesigned car. Three engines, and the 2.4 again has more than one version:

  • 2.4, VIN K — 2007 and 2008
  • 2.4, VIN J — 2008, split on the EGR valve
  • 2.4, VIN B — 2009 and 2010, in engine ID EDG (split on the EGR valve) and engine ID ED3
  • 2.7 V6, VIN R — 2007 and 2008 · VIN D — 2009 and 2010
  • 3.5 V6, VIN M — 2007 and 2008 · VIN V — 2009 and 2010

Note the pattern: on the 2.7 and the 3.5, the VIN character changes for 2009 even though the engine is the same size. The model year decides which letter to expect.

Transmissions

We do not currently list Sebring transmissions — only engines. If you need one, contact us and we will source it rather than offer you something that does not fit.

What we need from you

Body style first — sedan, convertible or coupe. Then model year, displacement, the 8th VIN character, and where it applies: PZEV or not, the EGR valve, and on a 2004 2.7 the tone ring count. Send us the VIN and we read what we can off it and confirm against your vehicle before anything ships.

Related

Everything we list for the make: Chrysler used engines. The Sebring's platform relatives are worth checking if a listing is unavailable: Dodge Caravan used engines and Chrysler 300 used engines. Or browse used engines by model.