Ford Explorer Used Engines

The Explorer is a thirty-year nameplate that changed platform three times, so the engine you need depends almost entirely on which generation you have. The key break is 2011: everything before it is a rear-drive-based truck with the Cologne V6 or a Modular V8, everything after is a front-drive unibody with the Cyclone V6 or an EcoBoost four. A 2010 engine will not go into a 2011 Explorer in any form.

Ford Explorer Used Engines — engine options by generation

Years Engine Family / VIN code Notes
1991–1994 4.0L OHV V6 Cologne — VIN X Pushrod, 160 hp
1995–2001 4.0L OHV / 4.0L SOHC V6 VIN X / VIN E SOHC from 1997 — different block, different timing
1996–2001 5.0L V8 Windsor — VIN P AWD only
2002–2005 4.0L SOHC V6 VIN E Rear timing chain cassette
2002–2005 4.6L V8 2V Modular — VIN 8 Two valves per cylinder
2006–2010 4.0L SOHC V6 VIN E Carried over
2006–2010 4.6L V8 3V Modular — VIN H Three valves, variable cam timing
2011–2019 (U502) 3.5L V6 Duratec / Cyclone — VIN 8 The volume engine
2011–2019 (U502) 2.0L / 2.3L EcoBoost VIN 9 / VIN T 2.3L replaced the 2.0L in 2016
2013–2019 (U502) 3.5L EcoBoost VIN T / VIN G Sport and Police Interceptor
2020–current (U625) 2.3L / 3.0L EcoBoost VIN T / VIN M Back to rear-drive architecture
2020–current (U625) 3.3L V6 hybrid VIN L Police and Limited Hybrid

How to pick the right one

Settle the generation first, then the 8th VIN digit. The one that catches people is the 4.0L: the OHV and SOHC engines are both "4.0L V6" in a listing and are completely different engines — different block, different heads, and the SOHC has its timing chain cassette at the rear of the block. If you are buying a 2011–2019 car, also confirm naturally aspirated against EcoBoost, because the 3.5L Duratec and the 3.5L EcoBoost share a displacement and nothing else.

What usually fails on these engines

The 1997–2010 4.0L SOHC is defined by one failure: the rear timing chain guide and tensioner wear out, the chain rattles on a cold start, and because the cassette sits behind the engine the repair means pulling the transmission. That is why so many of these get replaced rather than fixed. On the 2011-up 3.5L EcoBoost, the issues are the timing chain and condensate-driven misfire under boost in humid conditions. We pressure test every EcoBoost intercooler circuit and note the timing chain condition on every SOHC unit.

What ships with every unit

  • Compression and leak-down tested before it is listed, with the test sheet in the box.
  • VIN matched fitment — send us your VIN and we confirm the engine code against your vehicle before the order ships.
  • Written warranty on every engine, with labour coverage available.
  • Free freight anywhere in the lower 48, shipped on a pallet to a commercial address or a terminal.

Related reading: Ford 3.5L EcoBoost engine guide, Ford 5.4L Triton engine guide, all engine guides.

Ford Explorer used engines - frequently asked questions

Which engines did the Ford Explorer use?

Across 1991 to today the Ford Explorer was built with 4.0L OHV V6, 4.0L OHV / 4.0L SOHC V6, 5.0L V8, 4.0L SOHC V6, 4.6L V8, 3.5L V6, 2.0L / 2.3L EcoBoost, 3.5L EcoBoost and 2.3L / 3.0L EcoBoost. The table above lists which one belongs to each generation, with the engine family and VIN character that identifies it.

How do I know which engine is in my Ford Explorer?

The eighth character of the VIN encodes the engine on almost every US vehicle, and that is the only reliable way to settle it - two cars of the same year and trim can carry different engines. Send us the VIN and we check the engine code against your vehicle before anything ships.

Will an engine from a different year fit my Ford Explorer?

Settle the generation first, then the 8th VIN digit. The one that catches people is the 4.0L: the OHV and SOHC engines are both "4.0L V6" in a listing and are completely different engines — different block, different heads, and the SOHC has its timing chain cassette at the rear of the block.

What usually fails on these engines?

The 1997–2010 4.0L SOHC is defined by one failure: the rear timing chain guide and tensioner wear out, the chain rattles on a cold start, and because the cassette sits behind the engine the repair means pulling the transmission. That is why so many of these get replaced rather than fixed.

What comes with a used Ford Explorer engine?

Every engine is compression and leak-down tested before it is listed and the test sheet ships in the box. Fitment is VIN matched before the order goes out, every engine carries a written warranty with labour coverage available, and freight is free anywhere in the lower 48.